Wall Paint Quantity & Can Requirement कैलकुलेटर — मुफ़्त ऑनलाइन टूल और फॉर्मूला
Calculates total wall surface area minus window and door cutouts to determine the exact liters of paint and number of standard cans required.
Net Paintable Area: 37.8 m² (2 coats)
फॉर्मूला और गणना की विधि
Calculates total paint volume required by determining net wall surface area (perimeter × height minus door and window cutouts) divided by manufacturer coverage spread rates.
वेरिएबल परिभाषाएँ और माप इकाइयाँ
4m × 3.5m Room with 2.8m Ceiling (2 Coats)
Estimating paint for a room with 1 door (1.8m²) and 2 windows (2.4m² total) using 10 m²/L emulsion.
Primer and Surface Porosity Factors
Freshly plastered drywall or masonry walls absorb paint voraciously. Applying a dedicated acrylic wall primer seals the surface and prevents high-grade emulsion from soaking unevenly into the substrate.
Dark paint colors transitioning to light shades may require 3 coats, whereas refreshing an existing similar shade typically requires only 2.
Wall Paint Quantity & Can Requirement कैलकुलेटर से जुड़े अक्सर पूछे जाने वाले प्रश्न
How much area does 1 liter of wall paint cover?
Standard interior emulsion covers approximately 10 to 12 square meters (100 to 130 square feet) per liter for a single coat on primed walls.
Should I include the ceiling?
If painting the ceiling, add (Length × Width) to your total surface area.
संबंधित ऑनलाइन कैलकुलेटर
Wall Paint Quantity & Can Requirement कैलकुलेटर के साथ अक्सर संदर्भित अन्य कैलकुलेटर।
Tile & Flooring Quantity (with Wastage Margin) कैलकुलेटर
Computes the total number of ceramic or porcelain floor/wall tiles and required cartons needed, accounting for cutting wastage and room perimeter corners.
Concrete Slab & Cement Mix Ratio कैलकुलेटर
Determines total concrete volume in cubic meters/yards and decomposes it into required bags of cement, sand tons, and coarse aggregate according to mix ratios (e.g. M20 1:1.5:3).
Area & Perimeter Geometry (All Shapes) कैलकुलेटर
Computes geometric planar surface area and boundary perimeter for Rectangles, Circles, Triangles, Squares, and Trapezoids.